Our DTC Power Amplifier Series Will Work In Your LESLIE™ MODEL.
NOTE: Typical
Mounting Hole Combinations: 1+2+3+4 or 1+2+3+5+ or 1+3+5+6 or
1+3+4+6
DTC-4070-PA Power Amp requires less operating space than the original power
amplifiers.
A typical power amplifier board using (2) output
transistors with (2) wire harnesses.
LONG BOARD Power
Amplifier Configurations...
SINGLE Power Amplifier with (2)
Output Transistors for Driving both the Horn & Drum Together.
DUAL Power Amplifiers with (4) Output
Transistors for Driving the Horn & Drum Separately.
TRIPLE Power Amplifiers with (6) Output Transistors for Driving the Horn, Keyboard & Drum
Separately.
QUAD Power Amplifiers with (8) Output Transistors for Driving the Horn, Drum, Keyboard &
Pedal Separately.
MOUNTING NOTES:
Power Amplifiers may be arranged with the long sides running vertically or
side by side.
Power Amplifiers may be
arranged with the long sides running horizontal as in the
example of the
QUAD Amplifier Back Panel Assembly shown
below.
DTC POWER AMPLIFIER OPERATING SPECIFICATIONS:
DUAL RAIL +/- DC VOLTAGE... (5 pin socketed bundle, 1 for each amplifier)
+ Positive 28vdc to 43vdc >> (RED wire)
0 Volts COMMON >>>>>>>>> (BLACK wire)
- Negative 28vdc to 43vdc >> (BLUE wire)
REGULATED DC VOLTAGE
+ Positive 28vdc to 33vdc >> (YELLOW wire)
INPUT SIGNAL... (2 pin socket, white + signal, black - common)
Typical: 250mv to 500mv
Normal: 500mv to 2.0v
Clipping: > 2.0v
OUTPUT SIGNAL... (2 pin socket, red + signal, black - common)
Typical: 0 to 12.5vac
Normal: 12.5vac to 25.0vac
Clipping: > 25.0vac
SPEAKER LOADING...
4 to 16 ohms ( 8 ohms typical )
SPEAKER WATTAGE...
DTC-3060-PA Power Amp:
Range 30 to 60 watts adjustable Gain Control
DTC-4070-PA Power Amp:
Range 50 to 100 watts adjustable Gain Control
(with optional DTC4070BA Bump Amp series... up to 200 watts)
DISCLAIMER: leslie,circuits,amplifiers,upgrades,conversions,
hammond,church,organ,repair,replacements,guitar,bass,keyboard,21h,22r,31a,31h,45,47,51,102,103,122,125,147,
251,130,315,hl315,330,415,hl422,520,600,700,710,715,716,720,722,hl722,723,740,750,760,770,815,820,822,hl822,
825,860,900,910,925,x77l,x77d,vintage,classic,acoustic,ampeg,baldwin,carvin,cerwin,vega,earth,fender,gibson,
hiwatt,kasino,kustom,marshall,peavey,plush,sunn,vox,clubs,dance,disco,bar,saloon,civic,center,theater,concert,
hall,lighting,stage,drama,dimmer,control,controller,pack,console,floods,par,mirror,ball,spots,fog,strobe,effects,
sound,reinforcement,mixers,public,address,vocal,microphone,wireless,monitor,deck,pedals,drum,horn,piano,
custom,design,musical,instrument,aplification,equipment,systems,installation,install,music,
WE RECOMMEND THAT ALL DTC
POWER AMPLIFIER INSTALLATIONS AND CALIBRATIONS BE PERFORMED BY A QUALIFIED
AND/OR CERTIFIED
ELECTRONICS SERVICE TECHNICIAN FAMILIAR WITH THE
HAMMOND/LESLIE BRAND OF EQUIPMENT. WE ASSUME NO RESPONSIBILITY OR
LIABILITY
NOR WILL WE ACCEPT ANY LIABILITY OR RESPONSIBILITY FOR DAMAGES ASSOCIATED
WITH THIS PRODUCT CONCERNING MISUSE,
INCORRECT OR FAULTY CONNECTIONS,
INCORRECT INSTALLATIONS, IMPROPER USE AND/OR INCORRECT ADJUSTMENTS OF OUR DTC
POWER
AMPLIFIERS. WE STRONGLY RECOMMEND THE ORIGINAL SPEAKERS BE
REPLACED WITH HIGHER WATTAGE CAPABLE SPEAKERS THAT EXCEED
THE CONTINUOUS
MAXIMUM OUTPUT WATTAGE RATINGS OF OUR DTC POWER AMPLIFIERS.
PLEASE REFER TO OUR LIMITED WARRANTY FOR MORE DETAILS!
DOUG TAYLOR CONTROLS LLC IS NOT
AFFILIATED WITH HAMMOND™, LESLIE™, OR HAMMOND SUZUKI™
HAMMOND™, LESLIE™
are registered Trademarks of HAMMOND SUZUKI™
© Copyright 2006-2008 DOUG-TAYLOR.COM, DOUGTAYLORCONTROLS.COM, DOUG TAYLOR CONTROLS, LLC
All Rights Are Reserved, TM and ® indicates a Registered Trade Marks
throughout this site
Terms of Use and Privacy Policy
